How to Override HP Printer Cartridge Error & Fix Color Cartridge Error?


Error message on your HP printer will put a bar on your printing work, until the point that you clear the error. In the event that you see a message saying that you have a wrong ink cartridge, a bad color printing message or you are advised to expel the color cartridge, you should fix the issue, reset the printer and evacuate the error before you can proceed.

Hp Printer Cartridge

After you introduce a cartridge, a ‘Cartridge Problem,’ ‘Ink Cartridge Failure’ or similar message error shows on the printer control board. A symbol shows on the control board that demonstrates which cartridge is causing the error. To adjust the issue or say fix the HP Officejet printer cartridge error, you have to follow certain steps.

Here are the steps which you can follow to fix the error:

Step 1: Turn on the printer and open the cover where the ink cartridge is found. Take out or remove the cartridge.

Step 2: Place the ink cartridges back in the place, where they are placed before. Close the cover. For few minutes, turn off the printer.

Step 3: Turn the HP printer on. Print a test page. If the problem still persists, try the next few steps to correct the HP printer color cartridge error.

Step 4: Again, turn on the printer and open the cover where the ink cartridge is found. Evacuate the cartridge.

Step 5: Remove the cartridge and utilize a clean and dry fabric to tenderly wipe the contacts.

Step 6: Wipe from the highest point of the contact to the base. Do this for each contact.

Step 7: Place the HP ink cartridge back in the carriage. Turn the printer off for few minutes.

Step 8: Now, again turn the HP printer on. Print a test page. If you are facing the issue again, then try out the next steps.

Step 9: Want to know how to override hp printer cartridge error? Turn on the HP officejet printer, open the cover and expel both the black and color cartridge. Close the cover.

Step 10: Expel the power cord from the outlet and detach the links rushing to the PC or switch. Hold up one moment, plug in the power string and after that plug in the links.

Step 11: Open the cover and introduce both the black and the color ink cartridges. Turn on the printer.

Step 12: Print a test page. On the off chance that this does not right the problem, you should purchase new ink cartridges at an office supply store.

Follow the above steps and you can easily eradicate the HP printer cartridge error override issue.

Leave a Reply

Your email address will not be published. Required fields are marked *